• Q-4
    Qinn BRONZE UNION BONNET
    WHEEL VALVE NO. 9

    PRODUCT DETAIL :-SCREWED ON BONNET,INSIDE SCREW ,RISING STEM WITH SS-410 RENEWABLE TRIM.
    END DETAIL :- SCREWED FEMALE ENDS BSP TO BS:21
    TESTING :- HYDRAULIC.

    BODY TEST PRESSURE :- 500psig
    SEAT TEST PRESSURE :- 350 psig

     

     

           
    MATERIALS OF CONSTRUCTION
    PART NO. PART'S NAME MATERIALS SPECIFICATIONS
    1 NUT CARBON STEEL BS:916
    2 WASHER CARBON STEEL -----
    3 HAND WHEEL CAST IRON BS:1452,Gr.220
    4 STEM SS AISI-410
    5 GLAND NUT BRONZE BS:1400,LG2
    6 GLAND BUSH BRONZE BS:1400,LG2
    7 GLAND PACKING ASBESTOS -----
    8 BONNET BRONZE BS:1400,LG2
    9 SEAT NUT BRONZE BS:1400,LG2
    10 BODY BRONZE. BS:1400,LG2
    11 SEAT SS AISI-410
    12 BODY SEAT RING SS AISI-410
     
    DIMENSIONS IN mm
    NOMINAL SIZE ∅A L(+1.5) H~ W~
    15mm 1/2'' BSP 70 133 65
    20mm 3/4'' BSP 85 149 76
    25mm 1'' BSP 103 164 84
    32mm 1.1/4'' BSP 110 179 97
    40mm 1.1/2'' BSP 122 205 117
    50mm 2'' BSP 148 214 130
    65mm 2.1/2'' BSP 180 295 160
    80mm 3'' BSP 200 305 160
    APPLICATIONS
    WATER STEAM GAS OIL AIR
           
    NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.
  • Q-20
    Qinn UNION BONNET WHEEL VALVE NO.9 WITH TEFLON SEAT

    PRODUCT DETAILS :- SCREWED ON BONNET, INSIDE SCREW, INTEGRAL SEAT WITH TEFLON SEAT FACING AND STURDY HAND WHEEL OPERATED.
    END DETAILS :-SCREWED BSP PARALLEL TO BS:21

    TESTING :- HYDRAULIC.
    BODY TEST PRESSURE :- 500 Psig.
    SEAT TEST PRESSURE :- 350 Psig.

           
    MATERIALS OF CONSTRUCTION
    PART NO. PART'S NAME MATERIALS SPECIFICATIONS
    1 BODY BRONZE BS:1400 LG2
    2 BONNET BRONZE BS:1400 LG2
    3 GLAND NUT BRONZE BS:1400 LG2
    4 GLAND BRONZE BS:1400 LG2
    5 DISC NUT & WASHER BRASS BS:2874 CZ-114
    6 SPINDLE BRASS/S.S. BS:2874 CZ114/AISI-410
    7 SEAT S.S./BRONZE AISI-410/BS:1400 LG2
    8 SEAT FACING TEFLON PTFE
    9 GLAND PACKING ASBESTOS -----
    10 HAND WHEEL CAST IRON BS:1452 Gr.220
    11 WASHER CARBON STEEL -----
    12 NUT CARBON STEEL BS:916
     
    DIMENSIONS IN mm
    NOMINAL SIZE ∅D L(+1.5) H (APX) W (APX)
    15mm 1/2'' BSP 70 133 65
    20mm 3/4'' BSP 85 149 76
    25mm 1'' BSP 103 164 84
    32mm 1.1/4'' BSP 110 179 97
    40mm 1.1/2'' BSP 120 205 117
    50mm 2'' BSP 148 214 130
    APPLICATIONS
    WATER STEAM GAS OIL AIR
           
    NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.
  • Q-93
    Qinn BRONZE GLOBE VALVE ONE SIDE
    FLANGED AND ONE SIDE SCREWED

    PRODUCT DETAILS :-SCREWED IN BONNET , INSIDE SCREW ,
    INTEGRAL SEATING,RISING STEM ,HANDWHEEL OPERATED.
    END DETAILS :- INLET :- FLANGED TO BS:10 TABLE D.
    OUTLET :- SCREWED FEMALE BSP TO BS:21

    TESTING :- HYDRAULIC.
    BODY TEST PRESSURE :- 1.5 Mpa
    SEAT TEST PRESSURE :- 1.0 Mpa

           
    MATERIALS OF CONSTRUCTION
    PART NO. PART'S NAME MATERIALS SPECIFICATIONS
    1 NUT CARBON STEEL BS:936
    2 WASHER CARBON STEEL -----
    3 HAND WHEEL C.I. BS:1452,Gr.220
    4 STEM BRASS BS:2874,CZ114
    5 GLAND NUT BRONZE BS:1400 LG2
    6 GLAND BRONZE BS:1400 LG2
    7 GLAND PACKING ASBESTOS -----
    8 BONNET BRONZE BS:1400 LG2
    9 BODY BRONZE BS:1400 LG2
    10 DISC BRONZE BS:1400 LG2
    11 DISC NUT BRONZE BS:1400 LG2
     
    DIMENSIONS IN mm
    NOMINAL SIZE ∅A L D T H~ W
    15 1/2'' BSP 68 95.3 6.4 90 55
    20 3/4'' BSP 78 101.6 6.4 101 60
    25 1'' BSP 88 114.3 8.0 112 75
    32 1.1/4'' BSP 103 120.7 8.0 125 85
    40 1.1/2'' BSP 115 133.4 9.5 145 100
    50 2'' BSP 135 152.4 9.5 163 110
    65 2.1/2'' BSP 163 165.1 11.1 170 115
    80 3'' BSP 183 184.0 12.7 203 127
    100 4'' BSP 216 216.0 15.9 230 160
    APPLICATIONS
    WATER STEAM GAS OIL AIR
           
    NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.
  • Q-21
    Qinn BRONZE GLOBE VALVE NO.5

    PRODUCT DETAILS :- SCREWED IN BONNET, INSIDE SCREW & TEFLON SEAT, RISING STEM, SUITABLE FOR TRANSFORMER OIL AND AIR SERVICES.
    END DETAILS :- SCREWED FEMALE ENDS BSP TO BS:21
    OUTLET :- SCREWED FEMALE BSP TO BS:21

    TESTING :- HYDRAULIC.
    BODY TEST PRESSURE :- 500 Psig.
    SEAT TEST PRESSURE :- 300 Psig.

           
    MATERIALS OF CONSTRUCTION
    PART NO. PART'S NAME MATERIALS SPECIFICATIONS
    1 NUT CARBON STEEL BS:916
    2 WASHER CARBON STEEL ----------
    3 HAND WHEEL C.I. BS:1452,Gr.220
    4 STEM BRASS BS:2874,CZ114
    5 GLAND NUT BRONZE BS:1400,LG2
    6 GLAND BUSH BRONZE BS:1400,LG2
    7 GLAND PACKING ASBESTOS -----
    8 BONNET BRONZE BS:1400,LG2
    9 SEAT FACE TEFLON PTFE
    10 BODY BRONZE BS:1400,LG2
    11 SEAT BRONZE BS:1400,LG2
    12 SEAT NUT/WASHER BRASS BS:2874 CZ:114
     
    DIMENSIONS IN mm
    NOMINAL SIZE ∅A L H~ W~
    15mm 1/2'' BSP 52 83 58
    20mm 3/4'' BSP 68 83 58
    25mm 1'' BSP 80 112 67
    32mm 1.1/4'' BSP 90 115 73
    40mm 1.1/2'' BSP 100 132 85
    50mm 2'' BSP 127 154 110
    APPLICATIONS
    WATER STEAM GAS OIL AIR
           
    NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

     

« Back Next »
   
 

View Larger Map
Copyright © 2013 Valvco International. All rights reserved.