• Q-301
    Qinn CAST STEEL GLOBE STEAM STOP VALVE
    PN-40

    PRODUCT DETAILS:- BOLTED BONNET, OUTSIDE SCREW & YOKE TYPE, RISING STEM WITH BACKSEAT ARRANGEMENT, RENEWABLE STAINLESS STEEL(AISI 410)TRIM, HAND WHEEL OPERATED.
    END DETAILS :-
    FLANGED ENDS AS PER BS:4504,PART 1TABLE 40/1
    WORKING PRESSURE :- SUITABLE FOR STEAM LINE NOMINAL PRESSURE RATING PN-40, CONFORMING TO BS:5160/DIN 2401
    TESTING:- HYDRAULIC.
    BODY TESTED:- 76bar (1100psig. hyd.)
    SEAT TESTED:- 38bar ( 550 psig. hyd.)

           
    MATERIALS OF CONSTRUCTION
    PART NO. PART'S NAME MATERIALS SPECIFICATIONS
    1 NUT CARBON STEEL BS: 916
    2 WASHER CARBON STEEL -----
    3 HAND WHEEL CAST IRON BS:1452,GR.220
    4 YOKE BUSH ALUMINUM BRONZE BS:1400 AB2C
    5 LOCKING SCREW CARBON STEEL BS: 916
    6 GLAND FLANGED CAST STEEL ASTM A216 GR.WCB
    7 GLAND STAINLES STEEL AISI 410
    8 PACKING ASBESTOS GRAPHITED -----
    9 BONNET CAST STEEL ASTM A216 GR.WCB
    10 BACK SEAT STAINLESS STEEL AISI-410
    11 SEAT STAINLES STEEL AISI-410
    12 BODY CAST STEEL ASTM A216 GR.WCB
    13 STEM STAINLES STEEL AISI-410
    14 STUD,BOLT & NUT CARBON STEEL BS:916
    15 BACK SEAT RING STAINLES STEEL AISI-410
    16 GASKET SPIRAL WOUND ASBESTOS FILLED SS AISI-304
    17 BODY SEAT RING STAINLES STEEL AISI-410
     
    DIMENSIONS IN mm
    NOMINAL SIZE ∅D ∅E ∅F T B L H ∅W
    15mm 15 45 95 16 2 130 205 130
    20mm 20 58 105 18 2 150 210 140
    25mm 25 68 115 18 2 160 240 140
    32mm 32 78 140 18 2 180 250 160
    40mm 40 88 150 18 3 200 270 180
    50mm 50 102 165 20 3 230 285 200
    65mm 65 122 185 22 3 290 335 215
    80mm 80 138 200 24 3 310 355 250
    100mm 100 162 235 24 3 350 400 300
    APPLICATIONS
    WATER STEAM GAS OIL AIR
           
    NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.
  • Q-304
    Qinn CAST STEEL JUNCTION STEAM STOP VALVE PN-40

    PRODUCT DETAILS:-RIGHT ANGLE PATTERN, BOLTED BONNET, OUTSIDE SCREW & YOKE TYPE, RISING STEM WITH BACKSEAT ARRANGEMENT, RENEWABLE STAINLESS STEEL(AISI 410)TRIM, HAND OPERATED.
    END DETAILS :- FLANGED ENDS AS PER BS:4504 PN-40
    WORKING PRESSURE :- SUITABLE FOR STEAM LINE NOMINAL CONFORMNG TO BS-5160/DIN2401
    TESTING :- HYDRAULIC.
    BODY TESTED :- 76bar (1100psig. hyd.)
    SEAT TESTED :- 38bar ( 550 psig. hyd. )

           
    MATERIALS OF CONSTRUCTION
    PART NO. PART'S NAME MATERIALS SPECIFICATIONS
    1 NUT CARBON STEEL BS: 916
    2 WASHER CARBON STEEL -----
    3 HAND WHEEL CAST STEEL BS: 1452 Gr200
    4 STEM STAINLESS STEEL AISI-410
    5 BONNET CAST STEEL ASTM A216 Gr.WCB
    6 GLAND STAINLESS STEEL AISI-410
    7 PACKING ASBESTOS GRAPHITED
    8 GASKET SPIRAL WOUND ASBESTORS FILLES SS AISI-304
    9 DISC NUT STAINLESS STEEL AISI-410
    10 DISC STAINLES STEEL AISI-410
    11 BODY CAST STEEL ASTM A216 GR.WCB
    12 BODY SEAT RING STAINLES STEEL AISI-410
    13 YOKE BUSH ALUMINIUM BRONZE BS:1400 AB1C
    14 STUD BOLTS & NUTS CARBON STEEL BS:916
    15 BACK SEAT BUSH STAINLES STEEL AISI-410
    16 GLAND FLANGED CAST STEEL ASTM A216 Gr.WCB
     
    DIMENSIONS IN mm
    NOMINAL SIZE ∅D ∅E ∅F T B L H ∅W
    15mm 15 45 95 16 2 90 202 130
    20mm 20 58 105 18 2 90 202 140
    25mm 25 68 115 18 2 100 215 140
    32mm 32 78 140 18 2 105 230 160
    40mm 40 88 150 18 3 115 245 180
    50mm 50 102 165 20 3 125 260 200
    65mm 65 122 185 22 3 145 315 215
    80mm 80 138 200 24 3 155 330 250
    100mm 100 162 235 24 3 175 365 300
    APPLICATIONS
    WATER STEAM GAS OIL AIR
           
    NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.
« Back Next »
   
 

View Larger Map
Copyright © 2013 Valvco International. All rights reserved.