• Q-76
    Qinn CAST IRON ANGLE CHECK VALVE

    PRODUCT DETAILS:- SCREWED IN BONNET, RENEWABLE- BRONZE SEAT & RING, SOFT SEATING AND SUITABLE FOR HIGH PRESSURE IN PETROL INDUSTRY.
    END DETAILS :- SCREWED BSP FEMALE AS BS:21

    TESTING:- HYDRAULIC
    BODY TESTED:- 500 psig.
    SEAT TESTED:- 300 psig.

           
    MATERIALS OF CONSTRUCTION
    PART NO. PART'S NAME MATERIALS SPECIFICATIONS
    1 BONNET CAST IRON BS:1452 Gr.220
    2 GASKET C.A.F. ...
    3 BODY CAST IRON BS:1452 Gr.220
    4 SEAT BRONZE BS:1400 LG2
    5 SEAT FACING RUBBER NITRILE
    6 BODY RING BRONZE BS:1400 LG2
    7 SPLIT PIN BRASS BS:2872 CZ114
    8 WASHER ALLUMINIUM ...
    9 NUT BRASS BS:2872 CZ114
     
    DIMENSIONS IN mm
    NOMINAL SIZE A B~ C~
    40mm 1/2''BSP 78 76 70
    50mm 2''BSP 80 88 76
    APPLICATIONS
    WATER STEAM GAS OIL AIR
           
    NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.
  • Q-77
    Qinn CAST IRON dip CAP

    PRODUCT DETAILS:- TANK MOUNsTING WITH CAP & LOCKING
    ARRANGEMENT
    END DETAILS :-MOUNTING THREADS BSP TO BS:21
    WORKING :-SUITABLE FOR FLUID TANKS TO CHECK THE LEVEL OF TANK BY INSERTING DIP SCALE/GAUGE THROUGH GAUGE HOLE UNDER THE LOCKABLE CAP

     

           
    MATERIALS OF CONSTRUCTION
    S. NO. PART'S NAME MATERIALS SPECIFICATIONS
    1 BODY CAST IRON BS:1452 Gr.220
    2 LOCKING STRIPS CARBON STEEL -----
    3 CAP CAST IRON BS:1452 Gr.220
    4 SEAL RUBBER NITRILE
    5 RIVET CARBON STEEL -----
     
    DIMENSIONS IN mm
    NOMINAL SIZE ∅A H~
    40mm 1.1/2"BSP 63
    50mm 2"BSP 63
    APPLICATIONS
    WATER STEAM GAS OIL AIR
           
    NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.
  • Q-78
    Qinn CAST IRON FILL CAP

    PRODUCT DETAILS:- TANK MOUNTING WITH CAP & LOCKING ARRANGEMENT
    END DETAILS :-OUTLET :- FEMALE BSP AS TO BS:21
    INLET :- MALE BSP AS TO BS:21
    WORKING :-SUITABLE TO FILL THE OIL TANK THROUGH HOLE UNDER LOCKABLE CAP

           
    MATERIALS OF CONSTRUCTION
    S. NO. PART'S NAME MATERIALS SPECIFICATIONS
    1 BODY CAST IRON BS:1452 Gr.220
    2 LOCKING STRIPS CARBON STEEL -----
    3 CAP CAST IRON BS:1452 Gr.220
    4 SEAL RUBBER NITRILE
    5 RIVET CARBON STEEL -----
     
    DIMENSIONS IN mm
    NOMINAL SIZE ∅A ∅B H~
    65mm 2.1/2"BSP 2.1/2"BSP 90
    80mm 3"BSP 3"BSP 90
    APPLICATIONS
    WATER STEAM GAS OIL AIR
           
    NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.
« Back Next »
   
 

View Larger Map
Copyright © 2013 Valvco International. All rights reserved.